The European Ceramic Society
Laboratory sheet
Poland
DEPARTMENT OF CERAMICS AND COMPOSITES
Director : Dr. Krzysztof PERKOWSKI
Email : k.perkowski@icimb.pl
Phone : +48 22 5499744
Address : Institute of Ceramics and Building Materials Division of Ceramics and Concrete in Warsaw, 9Postępu St., 02-676 Warsaw
Website : www.icimb.pl/icimb_en/
Research topics :
- Ceramic nanopowders synthesis: Design and development of nanopowders synthesis by combustion method: Y203, Al203, MgAl2O4,Y3Al5O12
- Transparent ceramics: Application of high-pressure methods for fabrication of transparent ceramics materials from yttrium oxide, yttrium-aluminum garnet and magnesium-aluminum spinel doped with rare earth elements like Nd, Yb, Er for solid state lasers
Contact information:
Contact name: Dr. Eng. Magdalena GIZOWSKA
Tel: +48 22 5499778 Email: m.gizowska@icimb.pl - AlN Ceramic synthesis: Design and development of high temperature synthesis by free sintering, and HIP sintering method of AlN ceramics with sintering aids. The whole process design from granulation preparation till the final sinter. Preliminary research in transparent ceramics based on AlN: Application of high-pressure methods for fabrication of transparent ceramics materials from aluminum nitride; Design of lossy ceramics: Application of high-pressure methods for fabrication of
ceramic composite based on AlN and SiC - Transmission Electron Microscopy: Experienced with high manganese steels with nano-carbides and carbonitrides. Analytical (qualitative and quantitative) research down to few atoms using STEM techniques (HAADF, Dual-EELS, EDX)
- Biomaterials: Design and development of high temperature synthesis by free sintering, and HIP sintering method of Si3N4 ceramics; Design and development of thin layers of hydroxyapatite
deposited on titanium alloys
Contact information:
Contact name: Dr Joanna CHOLEWA
Tel: +48 22 5499781 Email: j.cholewa@icimb.pl - Ceramic nanopowders synthesis: Synthesis of nanopowders by precipitation method: CaF2, MgF2
- HIP: Application of Hot Isostatic Pressing for fabrication of oxide and non-oxide ceramics (transparent ceramics – yttria, YAG, magnesium-aluminum spinel)
- Non-oxide ceramics: Fabrication of non-oxide ceramics (i.e. SiC, Si3N4, MoSi2) using high temperature processes with controlled atmosphere
- Ballistic ceramics: Development of ceramic shields for stationary objects and ceramic ballistic covers used as armours for tanks and combat vehicles made from silicon carbide (SiC), silicon nitride (Si3N4), aluminium oxide (Al2O3)
- Ceramic components used in production of guided weapon and ammunition:
- sensor covers (radomes) made from aluminium-magnesium spinel MgAl2O4.
- viewfinders and laser materials made from aluminium-magnesium spinel MgAl2O4, pure yttriumaluminium garnet (YAG) and neodymium-doped Nd:YAG.
- rocket nozzles made from silicon carbide SiC and molybdenum disilicide MoSi2.
Contact information:
Contact name: Dr. Eng. Krzysztof PERKOWSKI
Tel: +48 791 982 875 Email: k.perkowski@icimb.pl
Exceptional facilities :
- particle size diameter and zeta potential analyzer Malvern ZetaSizer Nano ZS,
- rotating-oscillating rheometer KINEXUS by Malvern,
- Hot Isostatic Press (HIP; Tmax = 2000°C, Pmax = 300 MPa);
- graphite furnaces (controlled atmosphere: Ar, N2, vacuum,Tmax = 2200°C);
- MiniCer (Netzsch);
- clean room and glove-box with inner atmosphere equipped with hydraulic press.
Financial support programmes :
- National fundings: Innovation vouchers for SMES
Latest news
New book by Prof. Suk-Joong Kang:
Prof. Kang is one of the foremost worldwide specialists in sintering and this book, presented as a series of questions and answers concerning sintering may be useful both to students of ceramics and also to teachers looking for questions to discuss with their students.
YCN Newsletter 23 - Brazil Capes Thesis Award and Flash (Sinter) Crystallization of Glass by Isabela Reis Lavagnini
We are proud to announce that Isabela Reis Lavagnini has been awarded the 2024 Capes Thesis Award for her outstanding work in Materials, titled "Flash Sintering of Zirconia, Hydroxyapatite, and Hydroxyapatite-Zirconia Composite."
Information
Contact us for any information: info@ecers.org - We will respond to your inquiry as soon as possible.