The European Ceramic Society
News 2020
Report on the Electroceramics XVII conference
Electroceramics XVII was organized online from 24 to 28 August 2020 by the Materials Science Department of the Technische Universität Darmstadt in collaboration with the European Ceramic Society.
Report on yCAM 2020
The young Ceramists Additive Manufacturing Forum (yCAM) is an event and networking platform organized by EMC and supported by ECerS and the JECS Trust, dedicated to all young researchers interested in the Additive Manufacturing of ceramics.
YCN Research in Spot: Scaffolds derived from cuttlefish bone for bone tissue engineering by Ana Sofia Neto
YCN Research in Spot - December 2020
YCN Research in Spot: New materials for solid oxide fuel cell cathodes with superior performance and improved long-term stability by Christian Berger
YCN Research in Spot - December 2020
YCN Research in Spot: MAX phase and MAB phase derived MXenes for energy storage application by Nick Goossens
YCN Research in Spot - December 2020
YCN Industry in the Spot: Julie Devillard (Saint-Gobain Research Paris and MATEIS, Lyon)
Industry in the Spot - December 2020
YCN Industry in the Spot: Ambra Patterlini (Lincotek Medical Trento SpA, Italy) and Giovanni Urruth Bruno (Marion Technologies, France)
Interview of Ambra and Giovanni lead by Nicolas Somers, YCN committee member
Debriefing of the yCAM 2020 Conference by Eren Özmen, co-organizer
The 4th edition of the young Ceramists Additive Manufacturing Forum (yCAM) was carried out virtually in the last week of October 2020, following the ECerS School on additive manufacturing of ceramic materials.
Debriefing of the yCAM 2020 Conference by Farid Salari, participant for the first time
The young ceramists additive manufacturing forum, held on 28-30 October 2020, was a unique platform not only for young researchers in this field to find professional connections but also as a society to establish friendships among people who pursue their passion in a scientific environment.
Report on the 1st YCN Webinar
“How to get published in scientific journals” by Prof. Richard Todd (Editor-in-chief of the JECS)
Multifunctional Ceramic Matrix Composites for Nuclear Applications by James Wade-Zhu
YCN Research in Spot - September 2020
Tape casting of Si3N4 based bioceramics by Yasemin Tabak
YCN Research in Spot - September 2020
Letter from YCN Committee Member, Nicolas Somers, France
YCN Newsletter 6 - September 2020
Additive manufacturing of novel bioactive metalloid-bioceramic composites for bone tissue engineering by Nikhil Kamboj
YCN Research in Spot - September 2020
Journal of ECerS remains number 1!
The Journal of the European Ceramic Society was ranked No. 1 in the category Materials Science – Ceramics in the latest Clarivate Analytics Journal Citation Reports (2019) with an Impact Factor of 4.495.
Freeze casting of ultra-light ceramic foams by Hermina Hudelja
YCN Newsletter - May 2020
On-demand rapid processing of complex-shaped ceramics by Hugo Curto
YCN Newsletter - May 2020
Letter from Hermina Hudelja, PhD student who got the “Grant for 2020 American Winter Workshop”
YCN Newsletter - May 2020
Letter from YCN Committee Member, Marie Lasgorceix, France
YCN Newsletter - May 2020
ECerS involved in the AIMed project
ECerS is one of the organisation partners of the H2020 Marie Skłodowska-Curie actions (MSCA) AIMed project.
Collaboration agreement signed between ACerS and ECerS
American and European ceramic societies sign collaboration agreement: Ceramic societies will establish joint award, joint symposium and continue student event collaborations.
MS&T20; - presentations available on open access!
The ACerS 122nd Annual Meeting with Materials Science & Technology 2020 was organised online from 2nd to 6th November 2020. During this event, the first ACerS-ECerS joint symposium “Emerging Ceramic Technologies; Challenges and Future Prospects” took place.
Result of the call for grants to attend the 2020 ACerS Winter Workshop
There were 57 candidates from 21 countries and 16 grants were allowed.
Jülich researchers seek to reduce the cost of producing MAX phases and high-performance metals and ceramics using salt.
YCN Research in Spot by Jesus Gonzalez-Julian
Letter from our new YCN Committee Member, Antonia Ressler, Croatia
Dear Young Ceramists Network members, Firstly, I would like to thank you all for joining Young Ceramists Network and making it the platform for all of us to stay in touch and share opportunities and events.
Highly ductile amorphous oxide at room temperature and high strain rate
YCN Research in Spot by Erkka J. Frankberg, Tampere University of Technology (FN) and YCN committee member
In situ mechanical testing of ceramics in transmission electron microscope
YCN Research in Spot by Erkka Frankberg, Tampere University of Technology (FN) and YCN committee member
Latest news
Interview by Elsevier of Maria Canillas, guest editor for 2 special issues in Open Ceramics!
Maria was guest editor for the 2022 Special Issue "Young Ceramicists in the Spotlight" and the 2023 Special Issue on "Next frontier bioceramics: improvements from collaborative and multi-disciplinary approaches"
Next Deadline to apply to the JECS Trust is 30th November 2024!
Please note that the decisions of the JECS Trust board will not be known before end of February 2025. Activities submitted for the deadline of 30th November 2024 for support from the JECS Trust should then not begin before mid-March 2025.
Information
Contact us for any information: info@ecers.org - We will respond to your inquiry as soon as possible.
ECerS office
Av. Gouverneur Cornez , 4
7000 Mons
Belgium