The European Ceramic Society
Laboratory sheet
Poland
AGH University of Science and Technology, Krakow - Department of Ceramic and Refractory Materials
Technology of powders and sintered carbides, borides and nitrides
Director : Prof. DSc. Eng. Agnieszka GUBERNAT
Email : gubernat@agh.edu.pl
Phone : +48 12 6173696
Address : AGH University of Science and Technology Faculty of Material Science and Ceramic Department of Ceramic and Refractory Materials 2 Akademicka St., Building B8, 30-059 Kraków
Website : http://kcimo.pl
Research topics :
- Special synthesis methods, i.e. Self-propagating High Temperature Synthesis SHS, synthesis from elements using specific carbon substrates e.g. phenol-formaldehyde resins, expanded graphite or graphene
Contact information:
Contact name : Dr Eng. Dariusz ZIENTARA
Tel : +48 12 6172497
Email: zientara@agh.edu.pl - Obtaining single-phase sinters by solid state sintering, activated sintering or liquid phase sintering
Contact information:
Contact name : Prof. DSc. Eng. Agnieszka GUBERNAT
Tel : +48 12 6173696
Email: gubernat@agh.edu.pl - Obtaining particulate composites with carbide, boride and nitride matrix and carbide or boride inclusions. Modification of mechanical, thermal and electrical properties of these composites i.e. hardness, strength, fracture toughness, abrasion, thermal and electrical conductivity
Contact information:
Contact name : Dr Eng. Kamil KORNAUS
Tel : +48 12 6173696
Email: kornaus@agh.edu.pl - Research on computer simulations of stress state in materials. Quantitative analysis of microstructure in single-phase materials and composites
Contact information:
Contact name : Dr. Eng. Grzegorz GRABOWSKI
Tel : +48 12 6173696
Email: grzegorz.grabowski@agh.edu.pl - Special techniques for forming raw materials, i.e. slip and gel casting, filter pressing. Obtaining stable suspensions
Contact information:
Contact name : DSc. Eng. Łukasz ZYCH
Tel : +48 12 6172480
Email: lzych@agh.edu.pl
Exceptional facilities :
- cold isostatic press;
- hot isostatic press and hot press;
- high temperature furnace (up to 2300C);
- high temperature dilatometer (up to 2300C);
- DLS particle size measurements Zetasizer;
- mercury porosimeters;
- BET specific surface area analyser.
Financial support programmes :
- National funds: the National Centre for Research and Development and the National Science Centre.
Last news
New YCN Special Issue on Open Ceramics - Young Ceramists leading the Future
The special issue will accept hitherto unpublished original results submitted both in the form of full-length scientific papers and short communications, but also review papers on the topics in the list.
Results of the 1st Bioceramics Student Speech Contest
The ECerS Bioceramics Network is delighted to announce the winners of the 1st Bioceramics Student Speech Contest, which took place online from 17 to 18 April 2024!
Information
Contact us for any information: info@ecers.org - We will respond to your inquiry as soon as possible.
ECerS office
Av. Gouverneur Cornez , 4
7000 Mons
Belgium